Linear Shafting and Support Rails Total Products: 131
Filters
- 1 L TU CTL X 24 (0)
- 1 L TU CTL X 12 (0)
- 1 SOFT CTL 36 (0)
- 1 SOFT CTL 60 (0)
- 1-1/2 L TU CTL X 12 (0)
- 1-1/2 L TU CTL X 60 (0)
- 1-1/2L SMAE CTL X 10 (0)
- 1-1/2L SMAE CTL X 36 (0)
- 1-1/4 SOFT CTL X 12 (0)
- 1-1/4 SOFT CTL X 24 (0)
- 1-1/4 SOFT CTL X 48 (0)
- 1/2 SOFT CTL X 48 (0)
- 1/4L SMAE CTL X 18 (0)
- 1/4L SMAE CTL X 24 (0)
- 10MM SOFT CTL X 1500M (0)
- 10MM SOFT CTL X 2000M (0)
- 10MM SOFT CTL X 200MM (0)
- 12MM SOFT CTL X 200MM (0)
- 12MM SOFT CTL X 500MM (0)
- 16MM SOFT CTL X 500MM (0)
- 1L SMAE CTL X 10 (0)
- 1L SMAE CTL X 18 (0)
- 1L SMAE CTL X 22 (0)
- 1L SMAE CTL X 36 (0)
- 2 L TU CTL X 48 (0)
- 2 L TU CTL X 60 (0)
- 20MM SOFT CTL X 1200MM (0)
- 20MM SOFT CTL X 200MM (0)
- 25MM SOFT CTL X 1000MM (0)
- 25MM SOFT CTL X 2000MM (0)
- 25MM SOFT CTL X 400MM (0)
- 25MM SOFT CTL X 500MM (0)
- 3/4 L TU CTL X 24 (0)
- 3/4 L TU CTL X 48 (0)
- 3/4 SOFT CTL X 24 (0)
- 3/4L SMAE CTL X 28 (0)
- 3/8 SOFT CTL X 12 (0)
- 3/8L SMAE CTL X 18 (0)
- 3/8L SMAE CTL X 28 (0)
- 5/8 SOFT CTL X 12 (0)
- 5/8 SOFT CTL X 24 (0)
- 5/8 SOFT CTL X 36 (0)
- 5/8 SOFT CTL X 60 (0)
- CC08-006.000 (0)
- CC08-012.000 (0)
- CC08-032.000 (0)
- CC12-012.000 (0)
- CC16-042.000 (0)
- CC20-024.000 (0)
- CC20-030.000 (0)
- CC24-012.000 (0)
- CCPDL08-024.000 (0)
- CCPDL12-012.000 (0)
- CCPDL12-024.000 (0)
- CCPDL16-018.000 (0)
- CCPDL16-024.000 (0)
- CCPDL32-024.000 (0)
- CCPDL32-042.000 (0)
- CCR08-032.000 (0)
- CCR12-024.000 (0)
- CCR16-024.000 (0)
- CCR16-042.000 (0)
- CCR24-042.000 (0)
- CCR32-018.000 (0)
- CCR32-036.000 (0)
- LSR8L24 (0)
- LSR10-PDL24 (0)
- LSR12-PDL24 (0)
- LSR20-PDL24 (0)
- LSR24L24 (0)
- LSR-8-PD (0)
- LSR-10 (0)
- LSR-12 (0)
- LSR-16 (0)
- LSR-16-PD (0)
- LSR-24 (0)
- LSR-24-PD (0)
- LSRA12L24 (0)
- LSRA12L48 (0)
- LSRA16L48 (0)
- LSRA20L24 (0)
- LSRA20L48 (0)
- LSRAM12-0360-SL (0)
- LSRAM12-0600-SL (0)
- LSRAM12-1000-SL (0)
- LSRAM16-0300-SL (0)
- LSRAM16-0600-SL (0)
- LSRAM16-0900-SL (0)
- LSRAM20-0300-SL (0)
- LSRAM20-0600-SL (0)
- LSRAM20-0900-SL (0)
- LSRAM25-0400-SL (0)
- LSRAM25-0600-SL (0)
- LSRAM25-1000-SL (0)
- LSRAM30-0400-SL (0)
- LSRAM30-0600-SL (0)
- LSRAM30-1000-SL (0)
- LSRAM40-0400-SL (0)
- LSRAM40-0600-SL (0)
- LSRAM40-1000-SL (0)
Shaft Steel 0.500 In D 4.63 In
NBOne End Threaded Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.500 In D 36.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.000 In D 38.50 In
NBBoth Ends Threaded Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.625 In D 13.50 In
NBBoth Ends Threaded Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft SS 0.625 In D 36.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.625 In D 5.50 In
NBBoth Ends Threaded Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft SS 1.250 In D 6.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft SS 0.750 In D 6.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft SS 0.375 In D 12.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft SS 0.625 In D 12.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.250 In D 24.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.250 In D 24.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.625 In D 24.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.625 In D 12.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.375 In D 6.00 In
NBBoth Ends Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.250 In D 6.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.000 In D 36.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.000 In D 24.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.000 In D 18.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.000 In D 12.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.000 In D 6.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.750 In D 36.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 0.750 In D 24.00 In
NBOne End Tapped Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin
Shaft Steel 1.250 In D 15.00 In
NBBoth Ends Threaded Linear Shaft For Use With - System of Measurement Inch Surface Roughness 16 uin