Clamping Workholding and Positioning - Machine V Total Products: 281

Drill Press Vise 3 In.

Drill Press Vise 2-1/2 In.

Drill Press Vise 1-1/2 In.

Cross Vise 8 In.

Vise Swivel Base Swivel Base 11-3/4 in x 12-3/4 in x 7/8 in For Use With 19F396 Milling Vise Features Allows Positioning in 1 Degrees Increments Ba...

Machine Vise Milling Stationary Base Jaw Width (In.) 6 in Jaw Opening (In.) 8 3/4 in Throat Depth (In.) 1 3/4 in Overall Length (In.) 19-1/2 Overal...

Machine Vise Precision 6 x 2 in Base Jaw Width (In.) 2 in Jaw Opening (In.) 2 1/2 in Throat Depth (In.) 1 in Overall Length (In.) 6 Overall Height ...

Machine Vise Precision 7 x 2-1/2 in Base Jaw Width (In.) 2 1/2 in Jaw Opening (In.) 2 7/8 in Throat Depth (In.) 1 1/4 in Overall Length (In.) 7 Ove...

Machine Vise Tap Locking Lever Can Be Raised or Lowered to Tighten or Loosen Against The Workpiece

Machine Vise Tap Locking Lever Can Be Raised or Lowered to Tighten or Loosen Against The Workpiece

Machine Vise Tap Locking Lever Can Be Raised or Lowered to Tighten or Loosen Against The Workpiece

Machine Vise Can Be Turned On Either Side or Placed On End For Drilling One Plain Jaw and One Vertical/Horizontal Grooved Jaw Plate Precision Cut C...

Machine Vise General Purpose Can Be Used On Base Precision Grinding Sides and Front Side Face Permit Additional Mounting Positions Sides or End for...

Machine Vise Cross Slide Stationary Base Jaw Width (In.) 7 7/8 in Throat Depth (In.) 1 7/8 in Overall Length (In.) 5-1/2 in Overall Height (In.) 6-...

Machine Vise Cradle-Style Angle Base has Four 1/2 in Shoulder Slots for Quick Easy Positioning on the Machine Table

Vise Clamp Single Wedge 5/16-18 x 3/4 in (Mounting Screw) For Use With Fixtures Features High Holding Force Number of Pieces 1 Includes Mounting Screw

Vise Vacuum Complete System Kit For Use With Fixtures Features Vacuum Workholding Number of Pieces 1 Includes (2) Blank Pallets Base Unit

Machine Vise Rapid Acting Nut Consistent Jaw Movement Ground Vise Bed for Smooth Hardened Top V-Groove Jaws Made From High Grade Cast Iron Rapid Ac...

Machine Vise Cradle-Style Angle Base has Four 1/2 in Shoulder Slots for Quick Easy Positioning on the Machine Table

Machine Vise Cross Slide Jaw Width (In.) 8 in Jaw Opening (In.) 8 in Overall Length (In.) 11 Overall Height (In.) 7-1/4 Cast Side Knobs Durable Bas...

Machine Vise Cross Slide Cast Side Knobs Durable Base has 5 Bolt Lugs for Easy Mounting on a Machine Table

Machine Vise Low Profile Jaw Width (In.) 8 in Jaw Opening (In.) 8 in Throat Depth (In.) 2 in Overall Length (In.) 11 Overall Height (In.) 3-9/16 Ba...

Machine Vise Low Profile Jaw Width (In.) 6 in Jaw Opening (In.) 6 in Base has Four 1/2 in Shoulder Slots for Quick Easy Positioning on the Machine ...

Machine Vise Low Profile Base has Four 1/2 in Shoulder Slots for Quick Easy Positioning on the Machine Table Hardened V Grooved Jaws Hold Round Sha...